I, too, usually paint first and then stain. I think this really helps bring out the color. Anytime I take on a new project, I like to experiment on scrap pieces of wood. This helps me get a clear picture of what the color will look like.

You just want to make sure you knock down the shine off the previous finish. It does not have to be to the bare wood. Clean it well and let dry, then paint or stain. Now we are ready to stain and seal our piece.

I have dining table and six chairs and a hutch with drawers that I want to stain/paint a very dark brown close to black . Do you think I could mix this stain to get the color I’m wanting? And also do you think this technique is going to be durable enough for a dining table with small kids? I am willing to let it cure a few weeks if I need too!

Sand the table first to rough up the finish – a hand sanding block with 100 grit sandpaper will do the job. Then two thin coats of black chalk paint and then 2 light coats of poly. Sorry to hear that your finish got streaky. One thing that could have happened is the stain was not mixed throughly. Every so often even as you work, stir the stain in the can.

Leather Stain Remover Is Suitable For

For example grooves, cracks, corners, and crevices. So it’s important that you stay on top of wiping, that is, whisking away excess stain as you work. Otherwise, it may end up looking uneven. Staining is a matter of preference and it is not always necessary. Sometimes, your project may look way better if you keep the natural look of your wood and maybe just apply a clear finish. Using the right staining techniques can save you time and help you avoid messes.

That said, a second-hand piece that isn’t particularly valuable can be made to look much better with a simple home staining job. Place a large drop cloth where you intend to do the sanding. If it’s possible to work outside you’ll find the clean up much easier. I tried Minwax stains many times, they are really good. But now I’m looking for something new, maybe I will find the outstanding stain for my needs you know. Stain is messy, so drips are bound to happen.

stain furniture

How can I protect my next coat of stain from the bleed-through of the original stain? A fast reply would be appreciated as I want to get to the project immediately. https://bestwoodcarvingtool.com/how-to-stain-wood/ To update your piece of furniture even more, consider switching out the hardware or updating the current ones with a little bit of spray paint.

How To Paint & Stain Outdoor Wood Furniture

When staining or painting any piece of furniture black or a very dark color make sure you have a few good light sources directed on every side of the piece. This way you can see if you are covering the surface completely and catch any drips before they dry. Using a sander , sand the piece to remove any old stain and any scratches.

Wait for at least 3 day to see if you see differences in the sheen, lessen. If you rub your piece with a tad too much force , it can cause inconsistencies in your applied finish and you’ll have to start over with a good sanding. I’ve seen this enough times to not use them at all. Just an idea, but have you ever used chalk paint and clear wax on furniture? It provides one very durable finish, much better than poly.

Rub your hand over the dry stained piece of furniture. If there are any rough or uneven areas, lightly sand them down, taking care not to remove the stain. Choose your final coat, whether it’s wax or oil or polyurethane. Apply according https://bestwoodcarvingtool.com/ to the directions on the packaging of your product. Hi Jenny – I do think if you use thin coats of black chalk paint – you will like the results after the poly is on. The finish will be flat until you seal with wax or poly.

You also have to let it cure before using or it may chip off. If you do decide to try, it does take time to cure… about two weeks. After that time, if you sanded the surface and cleaned it well before staining, you won’t even be able to scratch it off the stain if you try. If your piece is in better condition though, you can definitely skip this step. This will produce a natural and consistent color once the stain dries.

Once the stripper has set, use a scraper to remove the old finish. Don’t try to force the issue by scraping too aggressively. When the finish has been completely removed, lightly sand the surface to lift the grain of the wood, making it more receptive to stain. Because sanding creates dust, remember to wipe down the piece with a rag or a tack cloth; also, vacuum the area in which are you working. You’ll also notice after applying the bleach, that the piece of furniture may feel rough again.

Repeat the process, continuing to work on one portion at a time until the piece is finished. Wipe down the sanded surface with a best way to stain wood tack cloth or with a paper towel soaked in mineral spirits. An easy DIY project is guaranteed to give new life to old pieces.

Always sand in the direction of the grain to avoid leaving unsightly scratches. Learn expert advice on basic steps for staining — a simple and inexpensive way to update wood furniture. For more DIY projects, visit StartRightStartHere.com or follow True Value on Facebook and Pinterest. I was one of the bloggers selected by True Value to work on the DIY Squad. I have been compensated for my time commitment to the program as well as writing about my experience. I have also been compensated for the materials needed for my DIY project.

Leather Stain Removers Coverage And Shelf Life

Trust me on this- cleaning oil based stain out of brushes is not fun. I would never recommend using a foam brush for paint, but for stain? They are the biggest timesavers for a job like this. Once dry, lightly sand that coat with 320 grit sandpaper, vacuum or wipe the dust, and apply the next coat letting it once again dry overnight.